ICALEPCS2023 - List of Authors (Milosic, T.)

Paper	Title	Page
MO4AO07	Status of the MicroTCA Based Beam Instrumentation DAQ Systems at GSI and FAIR	239
THPDP015	use link to see paper's listing under its alternate paper code
	T. Hoffmann, H. Bräuning, R.N. Geißler, T. Milosic GSI, Darmstadt, Germany
	While the first FAIR accelerator buildings are soon to be completed, MicroTCA-based data acquisition sys-tems for FAIR beam instrumentation are ready for use. By using commercial off-the-shelf components as well as open hardware with in-house expertise in FPGA programming, there are now DAQ solutions for almost all major detector systems in MicroTCA in operation at the existing GSI accelerators. Applications span a wide range of detector systems and hardware, often taking advantage of the high channel density and data trans-mission bandwidth available with MicroTCA. All DAQ systems are synchronised and triggered using a com-prehensive White Rabbit based timing system. This allows correlation of the data from the distributed acquisition systems on a nanosecond scale. In this paper, we present some examples of our DAQ implemented in MicroTCA covering the range of beam current, tune, position and profile measurements. While the latter uses GigE cameras in combination with scintillating screens, the other applications are based on ADCs with different sampling frequencies between 125 MSa/s up to 2.5 GSa/s or latching scalers with up to 10 MHz latching frequency.
	Slides MO4AO07 [3.497 MB]
	Poster MO4AO07 [3.790 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-ICALEPCS2023-MO4AO07
About •	Received ※ 29 September 2023 — Revised ※ 07 October 2023 — Accepted ※ 14 November 2023 — Issued ※ 07 December 2023
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

MO4AO07

Status of the MicroTCA Based Beam Instrumentation DAQ Systems at GSI and FAIR

239

THPDP015

use link to see paper's listing under its alternate paper code

T. Hoffmann, H. Bräuning, R.N. Geißler, T. Milosic
GSI, Darmstadt, Germany

While the first FAIR accelerator buildings are soon to be completed, MicroTCA-based data acquisition sys-tems for FAIR beam instrumentation are ready for use. By using commercial off-the-shelf components as well as open hardware with in-house expertise in FPGA programming, there are now DAQ solutions for almost all major detector systems in MicroTCA in operation at the existing GSI accelerators. Applications span a wide range of detector systems and hardware, often taking advantage of the high channel density and data trans-mission bandwidth available with MicroTCA. All DAQ systems are synchronised and triggered using a com-prehensive White Rabbit based timing system. This allows correlation of the data from the distributed acquisition systems on a nanosecond scale. In this paper, we present some examples of our DAQ implemented in MicroTCA covering the range of beam current, tune, position and profile measurements. While the latter uses GigE cameras in combination with scintillating screens, the other applications are based on ADCs with different sampling frequencies between 125 MSa/s up to 2.5 GSa/s or latching scalers with up to 10 MHz latching frequency.

Slides MO4AO07 [3.497 MB]

Poster MO4AO07 [3.790 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-ICALEPCS2023-MO4AO07

About •

Received ※ 29 September 2023 — Revised ※ 07 October 2023 — Accepted ※ 14 November 2023 — Issued ※ 07 December 2023

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)