| Paper |
Title |
Page |
| TUMBCMO37 |
Personnel Safety Systems for ESS Beam on Dump and Beam on Target Operations |
452 |
| |
- M. Mansouri, A. Abujame, A. Andersson, M. Carroll, D. Daryadel, M. Eriksson, A. Farshidfar, R. Foroozan, V.A. Harahap, P. Holgersson, J. Lastow, G.L. Ljungquist, N. Naicker, A. Nordt, D. Paulic, A. Petrushenko, D.A. Plotnikov, Y. Takzare
ESS, Lund, Sweden
|
|
| |
The European Spallation Source (ESS) is a Pan-European project with 13 European nations as members, including the host nations Sweden and Denmark. ESS has been through staged installation and commissioning of the facility over the past few years. Along with the facility evolution, several Personnel Safety Systems, as key contributors to the overall personnel safety, have been developed and commissioned to support the safe operation of e.g. test stand for cryomodules Site Acceptance Test, test stand for Ion Source and Low Energy Beam Transport, and trial operation of the Normal Conducting Linac. As ESS is preparing for Beam on Dump (BoD) and Beam on Target (BoT) operations in coming years, PSS development is ongoing to enable safe commissioning and operation of the Linear Accelerator, Target Station, Bunker, and day-one Neutron Instruments. Personnel Safety Systems at ESS (ESS PSS) is an integrated system that is composed of several PSS systems across the facility. Following the experience gained from the earlier PSS built at ESS, modularized solutions have been adopted for ESS PSS that can adapt to the evolving needs of the facility from BoD and BoT operations to installing new Neutron Instruments during facility steady-state operation. This paper provides an overview of the ESS PSS, and its commissioning plan to support BoD and BoT operations.
|
|
|
Slides TUMBCMO37 [1.135 MB]
|
|
| DOI • |
reference for this paper
※ doi:10.18429/JACoW-ICALEPCS2023-TUMBCMO37
|
|
| About • |
Received ※ 07 October 2023 — Revised ※ 08 October 2023 — Accepted ※ 13 October 2023 — Issued ※ 23 October 2023 |
| Cite • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
| |
| TUPDP078 |
Management of Configuration for Protection Systems at ESS |
695 |
| |
- M. Carroll, G.L. Ljungquist, M. Mansouri, A. Nordt, D. Paulic
ESS, Lund, Sweden
|
|
| |
The European Spallation Source (ESS) in Sweden is one of the largest science and technology infrastructure projects being built today. The facility design and construction include the most powerful linear proton accelerator ever built, a five-tonne, helium-cooled tungsten target wheel and 22 state-of-the-art neutron instruments. The Protection Systems Group (PSG) at ESS are responsible for the delivery and management of all the Personnel Safety Systems (PSS) and Machine Protection Systems (MPS), consisting of up to 30 PSS control systems and 6 machine protection systems. Due to the bespoke and evolving nature of the facility, managing the configuration of all these systems poses a significant challenge for the team. This paper will describe the methodology followed to ensure that the correct configuration is correctly implemented and maintained throughout the full engineering lifecycle for these systems.
|
|
|
Poster TUPDP078 [1.216 MB]
|
|
| DOI • |
reference for this paper
※ doi:10.18429/JACoW-ICALEPCS2023-TUPDP078
|
|
| About • |
Received ※ 06 October 2023 — Revised ※ 09 October 2023 — Accepted ※ 13 October 2023 — Issued ※ 26 October 2023 |
| Cite • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
| |