ICALEPCS2023 - Table of Session: TH2BC (Motion Control)

Paper	Title	Page
TH2BCO01	Synchronized Nonlinear Motion Trajectories at MAX IV Beamlines	1160
	P. Sjöblom, H. Enquist, Á. Freitas, J. Lidón-Simon, M. Lindberg, S. Malki MAX IV Laboratory, Lund University, Lund, Sweden
	The motions at beamlines sometimes require components to move along non-trivial and non-linear paths. This type of motion can be achieved by combining several simple axes, typically linear and rotation actuators, and controlling them to perform synchronized motions along individual non-linear paths. A good example is the 10-meter-long spectrometer at MAX IV Veritas beamline, operating under the Rowland condition. The system consists of 6 linked axes that must maintain the position of detectors while avoiding causing any damage to the mechanical structure. The nonlinear motions are constructed as a trajectory through energy or focus space. The trajectory changes whenever any parameter changes or when moving through focus space at fixed energy instead of through energy space. Such changes result in automated generation and uploading of new trajectories. The motion control is based on parametric trajectory functionality provided by IcePAP. Scanning and data acquisition are orchestrated through Tango and Sardana to ensure full motion synchronization and that triggers are issued correctly.
	Slides TH2BCO01 [0.884 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-ICALEPCS2023-TH2BCO01
About •	Received ※ 05 October 2023 — Revised ※ 24 October 2023 — Accepted ※ 14 December 2023 — Issued ※ 22 December 2023
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TH2BCO02	Open Source EtherCAT Motion Control Rollout for Motion Applications at SLS-2.0 Beamlines	1166
	A.S. Acerbo, T. Celcer, A. Sandström PSI, Villigen PSI, Switzerland
	The SLS-2.0 upgrade project comprises of a new storage ring and magnet lattice and will result in improved emittance and brightness by two orders of magnitude. Paired with these upgrades is a generational upgrade of the motion control system, away from VME based hardware and towards a more modern framework. For SLS-2.0 beamlines, the EtherCAT Motion Control (ECMC) open source framework has been chosen as the de-facto beamline motion control system for simple motion, analog/digital input/output and simple data collection. The ECMC framework comprises of a feature rich implementation of the EtherCAT protocol and supports a broad range of Beckhoff hardware, with the ability to add further EtherCAT devices. ECMC provides soft PLC functionality supported by the C++ Mathematical Expression Toolkit Library (ExprTk), which runs at a fixed frequency on the EtherCAT master at a rate up to the EtherCAT frame rate. This PLC approach allows for implementing complex motion, such as forward and backward kinematics of multi-positioner systems, i.e. roll, yaw, and pitch in a 5-axis mirror system. Additional logic can be loaded in the form of plugins written in C. Further work is ongoing to provide flexible Position Compare functionality at a frequency of 1 kHz coupled with event triggering as a way to provide a basic fly-scan functionality for medium performance applications with the use of standardized SLS-2.0 beamline hardware. We provide an overview of these and related ECMC activities currently ongoing for the SLS-2.0 project.
DOI •	reference for this paper ※ doi:10.18429/JACoW-ICALEPCS2023-TH2BCO02
About •	Received ※ 06 October 2023 — Accepted ※ 08 December 2023 — Issued ※ 12 December 2023
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TH2BCO03	The LCLS-II Experiment Control System	1172
	T.A. Wallace, D.L. Flathpresenter, M. Ghaly, T.K. Johnson, K.R. Lauer, Z.L. Lentz, R.S. Tang-Kong, J. Yin SLAC, Menlo Park, California, USA
	Funding: Work supported by the U.S. Department of Energy under contract number DE-AC02-76SF00515. The Linac Coherent Light Source (LCLS) has been undergoing upgrades for several years now through at least two separate major projects: LCLS-II a DOE 403.13b project responsible for upgrading the accelerator, undulators and some front-end beam delivery systems, and the LCLS-II Strategic Initiative or L2SI project which assumed responsibility for upgrading the experiment endstations to fully utilize the new XFEL machine capabilities to be delivered by LCLS-II. Both projects included scope to design, install and commission a control system prepared to handle the risks associated with the tenfold increase in beam power we will eventually achieve. This paper provides an overview of the new control system architecture from the LCLS-II and L2SI projects and status of its commissioning.
	Slides TH2BCO03 [2.700 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-ICALEPCS2023-TH2BCO03
About •	Received ※ 04 November 2023 — Accepted ※ 11 December 2023 — Issued ※ 16 December 2023
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TH2BCO04	SAMbuCa: Sensors Acquisition and Motion Control Framework at CERN	1179
	A. Masi, O.Ø. Andreassen, M. Arruat, M. Di Castro, R. Ferraro, I. Kozsar, E.W. Matheson, J.P. Palluel, P. Peronnard, J. Serrano, J. Tagg, F. Vaga, E. Van der Bij CERN, Meyrin, Switzerland S. Danzeca, M. Donzé, S.F. Fargier, M. Gulin, E. Soria European Organization for Nuclear Research (CERN), Geneva, Switzerland
	Motion control systems at CERN often have challenging requirements, such as high precision in extremely radioactive environments with millisecond synchronization. These demanding specifications are particularly relevant for Beam Intercepting Devices (BIDs) such as the collimators of the Large Hadron Collider (LHC). Control electronics must be installed in safe areas, hundreds of meters away from the sensors and actuators while conventional industrial systems only work with cable lengths up to a few tens of meters. To address this, several years of R&D have been committed to developing a high precision motion control system. This has resulted in specialized radiation-hard actuators, new sensors, novel algorithms and actuator control solutions capable of operating in this challenging environment. The current LHC Collimator installation is based on off-the-shelf components from National Instruments. During the Long Shutdown 3 (LS3 2026-2028), the existing systems will be replaced by a new high-performance Sensors Acquisition and Motion Control system (SAMbuCa). SAMbuCa represents a complete, in-house developed, flexible and modular solution, able to cope with the demanding requirements of motion control at CERN, and incorporating the R&D achievements and operational experience of the last 15 years controlling more than 1200 axes at CERN. In this paper, the hardware and software architectures, their building blocks and design are described in detail.
	Slides TH2BCO04 [5.775 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-ICALEPCS2023-TH2BCO04
About •	Received ※ 05 October 2023 — Revised ※ 12 October 2023 — Accepted ※ 19 December 2023 — Issued ※ 20 December 2023
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TH2BCO06	The SNS PLC Based Controls Solution for Stepper Motors	1187
	D.C. Williams, F.C. Medio ORNL, Oak Ridge, Tennessee, USA
	Funding: SNS is managed by UT-Battelle, LLC, under contract DE-AC05-00OR22725 for the U.S. Department of Energy The Spallation Neutron Source (SNS) at Oak Ridge National Laboratory has been operating for over 15 years and many electronic components are now obsolete and require replacement to assure reliability and sustainability. SNS uses stepper motors to control accelerator components throughout the facility including the cryomodule tuners, beam scrapers, and the primary and secondary stripper foils. The original motor controls were implemented with VME controllers, custom power supplies, and various types of motor drivers. As these components became less reliable and obsolete a new control solution was needed that could be applied to multiple motion control systems. Fast performance requirements are not crucial for these stepper motors, so the PLC technology was selected. The first system replaced was the Ring stripper foil control system and plans are underway to replace the beam scrapers. This paper provides an overview of the commercial off-the-shelf (COTS) hardware used to control stepper motors at SNS. Details of the design and challenges to convert a control system during short maintenance periods without disrupting beam operation will be covered in this paper.
	Slides TH2BCO06 [1.914 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-ICALEPCS2023-TH2BCO06
About •	Received ※ 19 September 2023 — Revised ※ 10 October 2023 — Accepted ※ 13 October 2023 — Issued ※ 25 October 2023
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Synchronized Nonlinear Motion Trajectories at MAX IV Beamlines

1160

P. Sjöblom, H. Enquist, Á. Freitas, J. Lidón-Simon, M. Lindberg, S. Malki
MAX IV Laboratory, Lund University, Lund, Sweden

The motions at beamlines sometimes require components to move along non-trivial and non-linear paths. This type of motion can be achieved by combining several simple axes, typically linear and rotation actuators, and controlling them to perform synchronized motions along individual non-linear paths. A good example is the 10-meter-long spectrometer at MAX IV Veritas beamline, operating under the Rowland condition. The system consists of 6 linked axes that must maintain the position of detectors while avoiding causing any damage to the mechanical structure. The nonlinear motions are constructed as a trajectory through energy or focus space. The trajectory changes whenever any parameter changes or when moving through focus space at fixed energy instead of through energy space. Such changes result in automated generation and uploading of new trajectories. The motion control is based on parametric trajectory functionality provided by IcePAP. Scanning and data acquisition are orchestrated through Tango and Sardana to ensure full motion synchronization and that triggers are issued correctly.

Slides TH2BCO01 [0.884 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-ICALEPCS2023-TH2BCO01

About •

Received ※ 05 October 2023 — Revised ※ 24 October 2023 — Accepted ※ 14 December 2023 — Issued ※ 22 December 2023

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TH2BCO02

Open Source EtherCAT Motion Control Rollout for Motion Applications at SLS-2.0 Beamlines

1166

A.S. Acerbo, T. Celcer, A. Sandström
PSI, Villigen PSI, Switzerland

The SLS-2.0 upgrade project comprises of a new storage ring and magnet lattice and will result in improved emittance and brightness by two orders of magnitude. Paired with these upgrades is a generational upgrade of the motion control system, away from VME based hardware and towards a more modern framework. For SLS-2.0 beamlines, the EtherCAT Motion Control (ECMC) open source framework has been chosen as the de-facto beamline motion control system for simple motion, analog/digital input/output and simple data collection. The ECMC framework comprises of a feature rich implementation of the EtherCAT protocol and supports a broad range of Beckhoff hardware, with the ability to add further EtherCAT devices. ECMC provides soft PLC functionality supported by the C++ Mathematical Expression Toolkit Library (ExprTk), which runs at a fixed frequency on the EtherCAT master at a rate up to the EtherCAT frame rate. This PLC approach allows for implementing complex motion, such as forward and backward kinematics of multi-positioner systems, i.e. roll, yaw, and pitch in a 5-axis mirror system. Additional logic can be loaded in the form of plugins written in C. Further work is ongoing to provide flexible Position Compare functionality at a frequency of 1 kHz coupled with event triggering as a way to provide a basic fly-scan functionality for medium performance applications with the use of standardized SLS-2.0 beamline hardware. We provide an overview of these and related ECMC activities currently ongoing for the SLS-2.0 project.

DOI •

reference for this paper ※ doi:10.18429/JACoW-ICALEPCS2023-TH2BCO02

About •

Received ※ 06 October 2023 — Accepted ※ 08 December 2023 — Issued ※ 12 December 2023

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TH2BCO03

The LCLS-II Experiment Control System

1172

T.A. Wallace, D.L. Flathpresenter, M. Ghaly, T.K. Johnson, K.R. Lauer, Z.L. Lentz, R.S. Tang-Kong, J. Yin
SLAC, Menlo Park, California, USA

Funding: Work supported by the U.S. Department of Energy under contract number DE-AC02-76SF00515.
The Linac Coherent Light Source (LCLS) has been undergoing upgrades for several years now through at least two separate major projects: LCLS-II a DOE 403.13b project responsible for upgrading the accelerator, undulators and some front-end beam delivery systems, and the LCLS-II Strategic Initiative or L2SI project which assumed responsibility for upgrading the experiment endstations to fully utilize the new XFEL machine capabilities to be delivered by LCLS-II. Both projects included scope to design, install and commission a control system prepared to handle the risks associated with the tenfold increase in beam power we will eventually achieve. This paper provides an overview of the new control system architecture from the LCLS-II and L2SI projects and status of its commissioning.

Slides TH2BCO03 [2.700 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-ICALEPCS2023-TH2BCO03

About •

Received ※ 04 November 2023 — Accepted ※ 11 December 2023 — Issued ※ 16 December 2023

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TH2BCO04

SAMbuCa: Sensors Acquisition and Motion Control Framework at CERN

1179

A. Masi, O.Ø. Andreassen, M. Arruat, M. Di Castro, R. Ferraro, I. Kozsar, E.W. Matheson, J.P. Palluel, P. Peronnard, J. Serrano, J. Tagg, F. Vaga, E. Van der Bij
CERN, Meyrin, Switzerland
S. Danzeca, M. Donzé, S.F. Fargier, M. Gulin, E. Soria
European Organization for Nuclear Research (CERN), Geneva, Switzerland

Motion control systems at CERN often have challenging requirements, such as high precision in extremely radioactive environments with millisecond synchronization. These demanding specifications are particularly relevant for Beam Intercepting Devices (BIDs) such as the collimators of the Large Hadron Collider (LHC). Control electronics must be installed in safe areas, hundreds of meters away from the sensors and actuators while conventional industrial systems only work with cable lengths up to a few tens of meters. To address this, several years of R&D have been committed to developing a high precision motion control system. This has resulted in specialized radiation-hard actuators, new sensors, novel algorithms and actuator control solutions capable of operating in this challenging environment. The current LHC Collimator installation is based on off-the-shelf components from National Instruments. During the Long Shutdown 3 (LS3 2026-2028), the existing systems will be replaced by a new high-performance Sensors Acquisition and Motion Control system (SAMbuCa). SAMbuCa represents a complete, in-house developed, flexible and modular solution, able to cope with the demanding requirements of motion control at CERN, and incorporating the R&D achievements and operational experience of the last 15 years controlling more than 1200 axes at CERN. In this paper, the hardware and software architectures, their building blocks and design are described in detail.

Slides TH2BCO04 [5.775 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-ICALEPCS2023-TH2BCO04

About •

Received ※ 05 October 2023 — Revised ※ 12 October 2023 — Accepted ※ 19 December 2023 — Issued ※ 20 December 2023

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TH2BCO06

The SNS PLC Based Controls Solution for Stepper Motors

1187

D.C. Williams, F.C. Medio
ORNL, Oak Ridge, Tennessee, USA

Funding: SNS is managed by UT-Battelle, LLC, under contract DE-AC05-00OR22725 for the U.S. Department of Energy
The Spallation Neutron Source (SNS) at Oak Ridge National Laboratory has been operating for over 15 years and many electronic components are now obsolete and require replacement to assure reliability and sustainability. SNS uses stepper motors to control accelerator components throughout the facility including the cryomodule tuners, beam scrapers, and the primary and secondary stripper foils. The original motor controls were implemented with VME controllers, custom power supplies, and various types of motor drivers. As these components became less reliable and obsolete a new control solution was needed that could be applied to multiple motion control systems. Fast performance requirements are not crucial for these stepper motors, so the PLC technology was selected. The first system replaced was the Ring stripper foil control system and plans are underway to replace the beam scrapers. This paper provides an overview of the commercial off-the-shelf (COTS) hardware used to control stepper motors at SNS. Details of the design and challenges to convert a control system during short maintenance periods without disrupting beam operation will be covered in this paper.

Slides TH2BCO06 [1.914 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-ICALEPCS2023-TH2BCO06

About •

Received ※ 19 September 2023 — Revised ※ 10 October 2023 — Accepted ※ 13 October 2023 — Issued ※ 25 October 2023

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)