ICALEPCS2023 - List of Authors (Ruckman, R.)

Paper	Title	Page
TUPDP123	SLAC ATCA Scope - Upgrading the EPICS Support Package	873
	D. Alnajjar, M.P. Donadio, K.H. Kim, R. Ruckman SLAC, Menlo Park, California, USA
	Funding: Work supported by US DOE contract DE-AC02-76SF00515 The SLAC ATCA Scope, a 4-channel dual scope, has an EPICS support package that runs on top of SLAC’s Common Platform software and firmware, and communicates with several high-performance systems in LCLS running on the 7-slot Advanced Telecommunications Computing Architecture (ATCA) crate. The software was completely refactored to improve the usability for IOC engineers. Once linked with an EPICS IOC, it initializes the scope hardware and instantiates the upper software stack providing a set of PVs to control the API and hardware, and to operate the oscilloscope. The exported PVs provide seamless means to configure triggers and obtain data acquisitions similar to a real oscilloscope. The ATCA scope probes are configured dynamically by the user to probe up to four inputs of the ATCA ADC daughter cards. The EPICS support package automatically manages available ATCA carrier board DRAM resources based on the number of samples requested by the user, allowing acquisitions of up to 8 GBytes per trigger. The user can also specify a desired sampling rate, and the ATCA Scope will estimate the nearest possible sampling rate using the current sampling frequency, and perform downsampling to try to match that rate. Adding the EPICS module to an IOC is simple and straightforward. The ATCA Scope support package works for all high-performance systems that have the scope common hardware implemented in its FPGAs. Generic interfaces developed in PyDM are also provided to the user to control the oscilloscope and enrich the user’s seamless overall experience.
	Poster TUPDP123 [0.984 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-ICALEPCS2023-TUPDP123
About •	Received ※ 03 October 2023 — Accepted ※ 30 November 2023 — Issued ※ 08 December 2023
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPDP125	Design and Implementation the LCLS-II Machine Protection System	877
	J.A. Mock, Z.A. Domke, R.T. Herbst, P. Krejcik, R. Ruckman, L. Sapozhnikov SLAC, Menlo Park, California, USA
	The linear accelerator complex at the SLAC National Accelerator Laboratory has been upgraded to include LCLS-II, a new linac capable of producing beam power as high as several hundred kW with CW beam rates up to 1 MHz while maintaining existing capabilities from the copper machine. Because of these high-power beams, a new Machine Protection System with a latency of less than 100 us was designed and installed to prevent damage to the machine when a fault or beam loss is detected. The new LCLS-II MPS must work in parallel with the existing MPS from the respective sources all the way through the user hutches to provide a mechanism to reduce the beam rate or shut down operation in a beamline without impacting the neighboring beamline when a fault condition is detected. Because either beamline can use either accelerator as its source and each accelerator has different operating requirements, great care was taken in the overall system design to ensure the necessary operation can be achieved with a seamless experience for the accelerator operators. The overall system design of the LCLS-II MPS software including the ability to interact with the existing systems and the tools developed for the control room to provide the user operation experience will be described.
	Poster TUPDP125 [1.360 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-ICALEPCS2023-TUPDP125
About •	Received ※ 04 October 2023 — Revised ※ 30 November 2023 — Accepted ※ 04 December 2023 — Issued ※ 14 December 2023
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

SLAC ATCA Scope - Upgrading the EPICS Support Package

873

D. Alnajjar, M.P. Donadio, K.H. Kim, R. Ruckman
SLAC, Menlo Park, California, USA

Funding: Work supported by US DOE contract DE-AC02-76SF00515
The SLAC ATCA Scope, a 4-channel dual scope, has an EPICS support package that runs on top of SLAC’s Common Platform software and firmware, and communicates with several high-performance systems in LCLS running on the 7-slot Advanced Telecommunications Computing Architecture (ATCA) crate. The software was completely refactored to improve the usability for IOC engineers. Once linked with an EPICS IOC, it initializes the scope hardware and instantiates the upper software stack providing a set of PVs to control the API and hardware, and to operate the oscilloscope. The exported PVs provide seamless means to configure triggers and obtain data acquisitions similar to a real oscilloscope. The ATCA scope probes are configured dynamically by the user to probe up to four inputs of the ATCA ADC daughter cards. The EPICS support package automatically manages available ATCA carrier board DRAM resources based on the number of samples requested by the user, allowing acquisitions of up to 8 GBytes per trigger. The user can also specify a desired sampling rate, and the ATCA Scope will estimate the nearest possible sampling rate using the current sampling frequency, and perform downsampling to try to match that rate. Adding the EPICS module to an IOC is simple and straightforward. The ATCA Scope support package works for all high-performance systems that have the scope common hardware implemented in its FPGAs. Generic interfaces developed in PyDM are also provided to the user to control the oscilloscope and enrich the user’s seamless overall experience.

Poster TUPDP123 [0.984 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-ICALEPCS2023-TUPDP123

About •

Received ※ 03 October 2023 — Accepted ※ 30 November 2023 — Issued ※ 08 December 2023

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPDP125

Design and Implementation the LCLS-II Machine Protection System

877

J.A. Mock, Z.A. Domke, R.T. Herbst, P. Krejcik, R. Ruckman, L. Sapozhnikov
SLAC, Menlo Park, California, USA

The linear accelerator complex at the SLAC National Accelerator Laboratory has been upgraded to include LCLS-II, a new linac capable of producing beam power as high as several hundred kW with CW beam rates up to 1 MHz while maintaining existing capabilities from the copper machine. Because of these high-power beams, a new Machine Protection System with a latency of less than 100 us was designed and installed to prevent damage to the machine when a fault or beam loss is detected. The new LCLS-II MPS must work in parallel with the existing MPS from the respective sources all the way through the user hutches to provide a mechanism to reduce the beam rate or shut down operation in a beamline without impacting the neighboring beamline when a fault condition is detected. Because either beamline can use either accelerator as its source and each accelerator has different operating requirements, great care was taken in the overall system design to ensure the necessary operation can be achieved with a seamless experience for the accelerator operators. The overall system design of the LCLS-II MPS software including the ability to interact with the existing systems and the tools developed for the control room to provide the user operation experience will be described.

Poster TUPDP125 [1.360 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-ICALEPCS2023-TUPDP125

About •

Received ※ 04 October 2023 — Revised ※ 30 November 2023 — Accepted ※ 04 December 2023 — Issued ※ 14 December 2023

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)