ICALEPCS2023 - List of Authors (Persson, A.P.)

Paper	Title	Page
THPDP051	LLRF and Timing System Integration at ESS	1426
	G.S. Fedel, A.A. Gorzawski, J.J. Jamróz, J.P.S. Martins, N. Milas, A.P. Persson, A.M. Svensson, R.H. Zeng ESS, Lund, Sweden
	The Low Level Radio Frequency (LLRF) system is an important part of a Spallation Source facility as ESS. LLRF is commonly used with many different setups depending on the aim: preparation, calibration, conditioning, commission and others. These different setups are strongly connected to another important system on accelerators: the Timing System. This proceeding presents how at ESS we implemented the integration between LLRF and Timing systems on the control system scope. The integration of these two systems provides different and important features as: allow different ways to trigger the RF system (synced or not to other systems), define how the RF output will be defined (based on the features of the expected beam), re-configure LLRF depending on the timing setup and more. This integration was developed on both ends, LLRF and timing, and is mostly concentrated on the control system layer based on EPICS. Dealing with the different scenarios, synchronicity and considering all the software, hardware and firmware involved are some of the challenges of this integration. The result of this work was used during the ESS accelerator commissioning in 2022 and will be used on next ESS accelerator commissioning in 2023.
	Poster THPDP051 [0.993 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-ICALEPCS2023-THPDP051
About •	Received ※ 05 October 2023 — Accepted ※ 08 December 2023 — Issued ※ 12 December 2023
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

LLRF and Timing System Integration at ESS

1426

G.S. Fedel, A.A. Gorzawski, J.J. Jamróz, J.P.S. Martins, N. Milas, A.P. Persson, A.M. Svensson, R.H. Zeng
ESS, Lund, Sweden

The Low Level Radio Frequency (LLRF) system is an important part of a Spallation Source facility as ESS. LLRF is commonly used with many different setups depending on the aim: preparation, calibration, conditioning, commission and others. These different setups are strongly connected to another important system on accelerators: the Timing System. This proceeding presents how at ESS we implemented the integration between LLRF and Timing systems on the control system scope. The integration of these two systems provides different and important features as: allow different ways to trigger the RF system (synced or not to other systems), define how the RF output will be defined (based on the features of the expected beam), re-configure LLRF depending on the timing setup and more. This integration was developed on both ends, LLRF and timing, and is mostly concentrated on the control system layer based on EPICS. Dealing with the different scenarios, synchronicity and considering all the software, hardware and firmware involved are some of the challenges of this integration. The result of this work was used during the ESS accelerator commissioning in 2022 and will be used on next ESS accelerator commissioning in 2023.

Poster THPDP051 [0.993 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-ICALEPCS2023-THPDP051

About •

Received ※ 05 October 2023 — Accepted ※ 08 December 2023 — Issued ※ 12 December 2023

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)