ICALEPCS2023 - List of Authors (Klys, K.)

Paper	Title	Page
THPDP076	Stream-based Virtual Device Simulation for Enhanced EPICS Integration and Automated Testing	1522
	M. Lukaszewski, K. Klys E9, London, United Kingdom
	Integrating devices into the Experimental Physics and Industrial Control System (EPICS) can often take a suboptimal path due to discrepancies between available documentation and real device behaviour. To address this issue, we introduce "vd" (virtual device), a software for simulating stream-based virtual devices that enables testing communication without connecting to the real device. It is focused on the communication layer rather than the device’s underlying physics. The vd listens to a TCP port for client commands and employs ASCII-based byte stream communication. It offers easy configuration through a user-friendly config file containing all necessary information to simulate a device, including parameters for the simulated device and information exchanged via TCP, such as commands and queries related to each parameter. Defining the protocol for data exchange through a configuration file allows users to simulate various devices without modifying the simulator’s code. The vd’s architecture enables its use as a library for creating advanced simulations, making it a tool for testing and validating device communication and integration into EPICS. Furthermore, the vd can be integrated into CI pipelines, facilitating automated testing and validation of device communication, ultimately improving the quality of the produced control system.
DOI •	reference for this paper ※ doi:10.18429/JACoW-ICALEPCS2023-THPDP076
About •	Received ※ 06 October 2023 — Accepted ※ 08 December 2023 — Issued ※ 12 December 2023
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUMBCMO30	EPICS Based Tool for LLRF Operation Support and Testing	432
	K. Klys, W. Cichalewski TUL-DMCS, Łódż, Poland P. Pierini ESS, Lund, Sweden
	Interruptions in the functioning of linear superconductive accelerators LLRF (Low-Level Radio Frequency) systems can result in significant downtime. This can lead to lost productivity and revenue. Accelerators are foreseen to operate under various conditions and in different operating modes. As such, it is crucial to have flexibility in their operation to adapt to demands. Automation is a potential solution to address these challenges by reducing the need for human intervention and improving the control’s quality over the accelerator. The paper describes EPICS-based tools for LLRF control system testing, optimization, and operations support. The proposed software implements procedures and applications that are usually extensions to the core LLRF systems functionalities and are performed by operators. This facilitates the maintenance of the accelerator and increases its flexibility in adaptation to various work conditions and can increase its availability level. The paper focuses on the architecture of the solution. It also depicts its components related to superconducting cavities parameters identification and elements responsible for their tuning. Since the proposed solution is destined for the European Spallation Source control system, the application has a form of multiple IOCs (Input/Output Controllers) wrapped into E3 (ESS EPICS Environment) modules. Nevertheless, it can be adjusted to other control systems - its logic is universal and applicable (after adaptations) to other LLRF control systems with superconducting cavities.
	Slides TUMBCMO30 [0.466 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-ICALEPCS2023-TUMBCMO30
About •	Received ※ 06 October 2023 — Revised ※ 12 October 2023 — Accepted ※ 28 November 2023 — Issued ※ 30 November 2023
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPDP041	The RF Protection Interlock System Prototype Verification	1406
	W. Cichalewski, P. Amrozik, G.W. Jabłoński, W. Jalmuzna, R. Kiełbik, K. Klys, R. Kotas, P. Marciniak, B. Pekoslawski, W. Tylman TUL-DMCS, Łódż, Poland B.E. Chase, E.R. Harms, N. Patel, P. Varghese Fermilab, Batavia, Illinois, USA
	The Radio Frequency Protection Interlock system plays vital role in the LLRF related/dependent accelerator sections Protection. It’s main role is to collect information from number different sensors and indicators around nearest cavities and cryomodule and provide instant RF signal termination in case of safety thresholds violation. This submission describes newly designed RFPI system tailored to the Proton Improvement Plan II (PIP-II) requirements. The proof of concept prototype of this system has been build. The paper includes also the CMTF environment evaluation tests results and findings as an input to the next full-scope prototype design.
DOI •	reference for this paper ※ doi:10.18429/JACoW-ICALEPCS2023-THPDP041
About •	Received ※ 06 October 2023 — Revised ※ 26 October 2023 — Accepted ※ 08 December 2023 — Issued ※ 13 December 2023
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Stream-based Virtual Device Simulation for Enhanced EPICS Integration and Automated Testing

1522

M. Lukaszewski, K. Klys
E9, London, United Kingdom

Integrating devices into the Experimental Physics and Industrial Control System (EPICS) can often take a suboptimal path due to discrepancies between available documentation and real device behaviour. To address this issue, we introduce "vd" (virtual device), a software for simulating stream-based virtual devices that enables testing communication without connecting to the real device. It is focused on the communication layer rather than the device’s underlying physics. The vd listens to a TCP port for client commands and employs ASCII-based byte stream communication. It offers easy configuration through a user-friendly config file containing all necessary information to simulate a device, including parameters for the simulated device and information exchanged via TCP, such as commands and queries related to each parameter. Defining the protocol for data exchange through a configuration file allows users to simulate various devices without modifying the simulator’s code. The vd’s architecture enables its use as a library for creating advanced simulations, making it a tool for testing and validating device communication and integration into EPICS. Furthermore, the vd can be integrated into CI pipelines, facilitating automated testing and validation of device communication, ultimately improving the quality of the produced control system.

DOI •

reference for this paper ※ doi:10.18429/JACoW-ICALEPCS2023-THPDP076

About •

Received ※ 06 October 2023 — Accepted ※ 08 December 2023 — Issued ※ 12 December 2023

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUMBCMO30

EPICS Based Tool for LLRF Operation Support and Testing

432

K. Klys, W. Cichalewski
TUL-DMCS, Łódż, Poland
P. Pierini
ESS, Lund, Sweden

Interruptions in the functioning of linear superconductive accelerators LLRF (Low-Level Radio Frequency) systems can result in significant downtime. This can lead to lost productivity and revenue. Accelerators are foreseen to operate under various conditions and in different operating modes. As such, it is crucial to have flexibility in their operation to adapt to demands. Automation is a potential solution to address these challenges by reducing the need for human intervention and improving the control’s quality over the accelerator. The paper describes EPICS-based tools for LLRF control system testing, optimization, and operations support. The proposed software implements procedures and applications that are usually extensions to the core LLRF systems functionalities and are performed by operators. This facilitates the maintenance of the accelerator and increases its flexibility in adaptation to various work conditions and can increase its availability level. The paper focuses on the architecture of the solution. It also depicts its components related to superconducting cavities parameters identification and elements responsible for their tuning. Since the proposed solution is destined for the European Spallation Source control system, the application has a form of multiple IOCs (Input/Output Controllers) wrapped into E3 (ESS EPICS Environment) modules. Nevertheless, it can be adjusted to other control systems - its logic is universal and applicable (after adaptations) to other LLRF control systems with superconducting cavities.

Slides TUMBCMO30 [0.466 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-ICALEPCS2023-TUMBCMO30

About •

Received ※ 06 October 2023 — Revised ※ 12 October 2023 — Accepted ※ 28 November 2023 — Issued ※ 30 November 2023

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPDP041

The RF Protection Interlock System Prototype Verification

1406

W. Cichalewski, P. Amrozik, G.W. Jabłoński, W. Jalmuzna, R. Kiełbik, K. Klys, R. Kotas, P. Marciniak, B. Pekoslawski, W. Tylman
TUL-DMCS, Łódż, Poland
B.E. Chase, E.R. Harms, N. Patel, P. Varghese
Fermilab, Batavia, Illinois, USA

The Radio Frequency Protection Interlock system plays vital role in the LLRF related/dependent accelerator sections Protection. It’s main role is to collect information from number different sensors and indicators around nearest cavities and cryomodule and provide instant RF signal termination in case of safety thresholds violation. This submission describes newly designed RFPI system tailored to the Proton Improvement Plan II (PIP-II) requirements. The proof of concept prototype of this system has been build. The paper includes also the CMTF environment evaluation tests results and findings as an input to the next full-scope prototype design.

DOI •

reference for this paper ※ doi:10.18429/JACoW-ICALEPCS2023-THPDP041

About •

Received ※ 06 October 2023 — Revised ※ 26 October 2023 — Accepted ※ 08 December 2023 — Issued ※ 13 December 2023

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)