ICALEPCS2023 - List of Authors (Domke, Z.A.)

Paper	Title	Page
TUPDP125	Design and Implementation the LCLS-II Machine Protection System	877
	J.A. Mock, Z.A. Domke, R.T. Herbst, P. Krejcik, R. Ruckman, L. Sapozhnikov SLAC, Menlo Park, California, USA
	The linear accelerator complex at the SLAC National Accelerator Laboratory has been upgraded to include LCLS-II, a new linac capable of producing beam power as high as several hundred kW with CW beam rates up to 1 MHz while maintaining existing capabilities from the copper machine. Because of these high-power beams, a new Machine Protection System with a latency of less than 100 us was designed and installed to prevent damage to the machine when a fault or beam loss is detected. The new LCLS-II MPS must work in parallel with the existing MPS from the respective sources all the way through the user hutches to provide a mechanism to reduce the beam rate or shut down operation in a beamline without impacting the neighboring beamline when a fault condition is detected. Because either beamline can use either accelerator as its source and each accelerator has different operating requirements, great care was taken in the overall system design to ensure the necessary operation can be achieved with a seamless experience for the accelerator operators. The overall system design of the LCLS-II MPS software including the ability to interact with the existing systems and the tools developed for the control room to provide the user operation experience will be described.
	Poster TUPDP125 [1.360 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-ICALEPCS2023-TUPDP125
About •	Received ※ 04 October 2023 — Revised ※ 30 November 2023 — Accepted ※ 04 December 2023 — Issued ※ 14 December 2023
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPDP130	PyDM Archive Viewer	892
	Y.G. Yazar, J.J. Bellister, Z.A. Domke, T. Summers SLAC, Menlo Park, California, USA F.M. Osman Santa Clara University, Santa Clara, California, USA
	A new open-source PyQT-based archive viewer application has been developed at SLAC National Accelerator Laboratory. The viewer’s main purpose is to visualize both live values and historical Process Variable (PV) data retrieved from the EPICS Archive Appliances. It is designed as both a stand-alone application and to be easily launched from widgets on PyDM operator interfaces. In addition to providing standard configurability for things like traces, formulas, style and data exporting, it provides post-processing capabilities for filtering and curve fitting. The current release supports standard enumerated and analog data types as well as waveforms. Extension of this to support EPICS7 normative data types such as NTTable and NTNDArray is under development.
DOI •	reference for this paper ※ doi:10.18429/JACoW-ICALEPCS2023-TUPDP130
About •	Received ※ 06 October 2023 — Revised ※ 22 October 2023 — Accepted ※ 14 December 2023 — Issued ※ 20 December 2023
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Design and Implementation the LCLS-II Machine Protection System

877

J.A. Mock, Z.A. Domke, R.T. Herbst, P. Krejcik, R. Ruckman, L. Sapozhnikov
SLAC, Menlo Park, California, USA

The linear accelerator complex at the SLAC National Accelerator Laboratory has been upgraded to include LCLS-II, a new linac capable of producing beam power as high as several hundred kW with CW beam rates up to 1 MHz while maintaining existing capabilities from the copper machine. Because of these high-power beams, a new Machine Protection System with a latency of less than 100 us was designed and installed to prevent damage to the machine when a fault or beam loss is detected. The new LCLS-II MPS must work in parallel with the existing MPS from the respective sources all the way through the user hutches to provide a mechanism to reduce the beam rate or shut down operation in a beamline without impacting the neighboring beamline when a fault condition is detected. Because either beamline can use either accelerator as its source and each accelerator has different operating requirements, great care was taken in the overall system design to ensure the necessary operation can be achieved with a seamless experience for the accelerator operators. The overall system design of the LCLS-II MPS software including the ability to interact with the existing systems and the tools developed for the control room to provide the user operation experience will be described.

Poster TUPDP125 [1.360 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-ICALEPCS2023-TUPDP125

About •

Received ※ 04 October 2023 — Revised ※ 30 November 2023 — Accepted ※ 04 December 2023 — Issued ※ 14 December 2023

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPDP130

PyDM Archive Viewer

892

Y.G. Yazar, J.J. Bellister, Z.A. Domke, T. Summers
SLAC, Menlo Park, California, USA
F.M. Osman
Santa Clara University, Santa Clara, California, USA

A new open-source PyQT-based archive viewer application has been developed at SLAC National Accelerator Laboratory. The viewer’s main purpose is to visualize both live values and historical Process Variable (PV) data retrieved from the EPICS Archive Appliances. It is designed as both a stand-alone application and to be easily launched from widgets on PyDM operator interfaces. In addition to providing standard configurability for things like traces, formulas, style and data exporting, it provides post-processing capabilities for filtering and curve fitting. The current release supports standard enumerated and analog data types as well as waveforms. Extension of this to support EPICS7 normative data types such as NTTable and NTNDArray is under development.

DOI •

reference for this paper ※ doi:10.18429/JACoW-ICALEPCS2023-TUPDP130

About •

Received ※ 06 October 2023 — Revised ※ 22 October 2023 — Accepted ※ 14 December 2023 — Issued ※ 20 December 2023

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)